Breathewood Bond 3kg

R343.51

In stock

Categories
Prep and Repair

A primer
coating for wooden and other substrates which differ in flexibility from
cementitious and concrete surface, 
before application of BC100WS Breathecoat Smooth or BC102WS
Breathecoat Textured.

Available
in a 3,4kg Powder Pack, mixed with 3L of water to a smooth consistency, yields
5L and applied at coverage 25m² to 35m² per 5L. Only a single coat is
applied.

Surface Preparation:

Wall
substrate only needs to be touch-dry.

The
substrate must be sound, and free of oil and other contaminants that might
cause delamination. Any other surface treatment such as wooden varnishes must
be removed completely.

Mixing:

Decant 3L
of water in a suitable container to mix 5L of BWB100 Breathewood Bond.

 Gradually add the 3.4kg of powder, while
mechanically stirring (drill with paint mixer paddle bit). Mechanically mix for
3 minutes after the last powder is added and allow standing for 30 minutes,
before application.

Application:

Apply using
a roller and brush, ensuring complete coverage of the substrate.

Only a
single layer of the BWB100 Breathewood Bond is applied.

Allow to
dry completely before application of the BC100WS Breathecoat or BC102WS
Breathecoat Textured.

Coverage:
25m² to 35m² per 5L.

Breathewood Bond 3kg

Description

A primer coating for wooden and other substrates which differ in flexibility from cementitious and concrete surface,  before application of BC100WS Breathecoat Smooth or BC102WS Breathecoat Textured.

Available in a 3,4kg Powder Pack, mixed with 3L of water to a smooth consistency, yields 5L and applied at coverage 25m² to 35m² per 5L. Only a single coat is applied.

Surface Preparation:

Wall substrate only needs to be touch-dry.

The substrate must be sound, and free of oil and other contaminants that might cause delamination. Any other surface treatment such as wooden varnishes must be removed completely.

Mixing:

Decant 3L of water in a suitable container to mix 5L of BWB100 Breathewood Bond.

 Gradually add the 3.4kg of powder, while mechanically stirring (drill with paint mixer paddle bit). Mechanically mix for 3 minutes after the last powder is added and allow standing for 30 minutes, before application.

Application:

Apply using a roller and brush, ensuring complete coverage of the substrate.

Only a single layer of the BWB100 Breathewood Bond is applied.

Allow to dry completely before application of the BC100WS Breathecoat or BC102WS Breathecoat Textured.

Coverage: 25m² to 35m² per 5L.

Reviews

There are no reviews yet.

Be the first to review “Breathewood Bond 3kg”

Your email address will not be published. Required fields are marked *