Breathecoat Crack Super Repair Bond 3.4kg

R244.77

In stock

Categories
Prep and Repair

A cementitious crack
filler to repair cracks in concrete and other cementitious surfaces. Available
in a 3.4kg pack. Water addition is limited to obtain a smooth paste.

Surface
Preparation:

Substrate must be sound,
clean, dust free and free from oil and fat stains. All dust and loose material
in crack must be removed.

Mixing:

Decant the CSRB
Crack Super Repair Bond
into a suitable mixing vessel . Gradually add
water, while mechanically stirring (drill with paint mixer paddle bit). Mix
until a smooth paste consistency is obtained. Apply immediately.

Application:

Apply the CSRB Crack
Super Repair Bond
onto the cracks, using a spatula, forcing the
material into the cracks.

Allow to cure for 24 hours
and sand down irregularities, using a fine sanding paper (200 – 360 grit)

Specification is the same
for interior as well as exterior application.

All equipment to be cleaned
with water.

Cracks
> 1mm

Product:

CSRB
Crack Super Repair Bond with Graded Silica Sand:

A cementitious crack
filler to repair cracks in concrete and other cementitious surfaces. Available
in a 3.4kg pack and 1kg of Graded Silica Sand . Water addition is
limited to obtain a smooth paste.

Surface
Preparation:
Substrate must be sound, clean, dust free and free
from oil and fat stains. All dust and loose material in crack must be removed.
Open the cracks, using a grinder with masonry blade or small chisel.

Clean the opened cracks,
making sure to remove all dust and loose particles.

Pre-damp the contact
surface.

Mixing:

Decant the CSRB
Crack Super Repair Bond
and Graded Silica Sand into a
suitable mixing vessel . Gradually add water, while mechanically stirring
(drill with paint mixer paddle bit). Mix until a smooth paste consistency is
obtained. Apply immediately.

Application:

Apply the CSRB Crack
Super Repair Bond with Graded Silica Sand
into the cracks, using a
spatula, forcing the material into the cracks.

Allow to cure for 24 hours
and sand down irregularities, using a fine sanding paper (200 – 360 grit)

Specification is the same
for interior as well as exterior application.

All equipment to be
cleaned with water.

All Breathecoat Materials
manufactured by:

E-mail:

Breathecoat Crack Super Repair Bond 3.4kg

Description

A cementitious crack filler to repair cracks in concrete and other cementitious surfaces. Available in a 3.4kg pack. Water addition is limited to obtain a smooth paste.

Surface Preparation:

Substrate must be sound, clean, dust free and free from oil and fat stains. All dust and loose material in crack must be removed.

Mixing:

Decant the CSRB Crack Super Repair Bond into a suitable mixing vessel . Gradually add water, while mechanically stirring (drill with paint mixer paddle bit). Mix until a smooth paste consistency is obtained. Apply immediately.

Application:

Apply the CSRB Crack Super Repair Bond onto the cracks, using a spatula, forcing the material into the cracks.

Allow to cure for 24 hours and sand down irregularities, using a fine sanding paper (200 – 360 grit)

Specification is the same for interior as well as exterior application.

All equipment to be cleaned with water.

Cracks > 1mm

Product:

CSRB Crack Super Repair Bond with Graded Silica Sand:

A cementitious crack filler to repair cracks in concrete and other cementitious surfaces. Available in a 3.4kg pack and 1kg of Graded Silica Sand . Water addition is limited to obtain a smooth paste.

Surface Preparation: Substrate must be sound, clean, dust free and free from oil and fat stains. All dust and loose material in crack must be removed. Open the cracks, using a grinder with masonry blade or small chisel.

Clean the opened cracks, making sure to remove all dust and loose particles.

Pre-damp the contact surface.

Mixing:

Decant the CSRB Crack Super Repair Bond and Graded Silica Sand into a suitable mixing vessel . Gradually add water, while mechanically stirring (drill with paint mixer paddle bit). Mix until a smooth paste consistency is obtained. Apply immediately.

Application:

Apply the CSRB Crack Super Repair Bond with Graded Silica Sand into the cracks, using a spatula, forcing the material into the cracks.

Allow to cure for 24 hours and sand down irregularities, using a fine sanding paper (200 – 360 grit)

Specification is the same for interior as well as exterior application.

All equipment to be cleaned with water.

All Breathecoat Materials manufactured by:

E-mail:

Reviews

There are no reviews yet.

Be the first to review “Breathecoat Crack Super Repair Bond 3.4kg”

Your email address will not be published. Required fields are marked *